Satel PERFECTA - Remote Communication and Service; PERFECTA Soft Communication via GPRS; Service Mode Operations

24 PERFECTA SATEL
Active
s
– if this option is enabled, the installer/service technician has access to the alarm
em i.e.:
fter entering the service code, it is possible to enter the service mode and run some
nctions available in the user m
yst
– a
fu enu,
partition
/ disarm it, clear alarm, bypass / unbypass zones) and edit the users (he cannot
however grant them access to the partition 1). The option is available, if you have access
– it is possible to configure the alarm system by using the PERFECTA SOFT program.
Partition 1 – if this option is enabled, the installer/service technician can operate the
1 (arm / disarm it, clear alarm, bypass / unbypass zones) and edit the users (he cannot
however grant them access to the partition 2). The option is available, if you have access
to the partition 1.
Partition 2 – if this option is enabled, the installer/service technician can operate the partition
2 (arm
to the partition 2.
If there is no user in the alarm system having the S
ERVICE ACCESS right, the
installer/service technician has access to the alarm system (also by using the
PERFECTA SOFT program and the PERFECTA CONTROL application), can operate the
partitions and edit the users.
6.19 Establishing communication with PERFECTA SOFT via GPRS
The PERFECTA SOFT function makes it possible to start communication with the PERFECTA
SOFT program via GPRS to allow remote programming of the control panel. This is one of the
methods for establishing communication between the PERFECTA SOFT program and the
alarm control panel. For more information, please refer to the control panel programming
manual.
6.20 Service mode
The SERVICE MODE function is only available after entering the service code.
enter the service mode. After entering the service mode, the functions tha
It allows you to
t allow you to
L
configure the alarm system will be displayed. For more information, please refer to the control
panel programming manual.
7. istening in
If a m
from t
telephone. Consult the installer to learn the phone number you must call to listen in to what is
oing on in the premises. If you are notified of events in the alarm system by voice
messages, the control panel, after playing back the message, will turn on the microphone to
allow you to listen to what is going on in the premises.
icrophone is connected to the control panel, you can listen in to the sounds coming
he premises protected by the alarm system. The listening-in feature is available by
g
8. Keyfobs PERFECTA 16-WRL / PERFECTA 32-WRL
You can operate the alarm system by using the MPT-350 keyfob, which can start up to
6 functions. For information about functions assigned to individual buttons / button
combinations, please consult the person who has configured the keyfob settings.
The alarm system may be configured so that, in some circumstances, arming the
system by using the keyfob will fail (see “System problems and arming failure”).
Consult the installer to lea ffectively notif ed of the system rn how you are to be e i
arming failure.