Satel PERFECTA - SIM Card Management; Checking SIM Card Balance; Topping Up and Unblocking SIM Cards; Service Access Rules

SATEL PERFECTA 23
6.17 S cIM ards
6.17.1 Checking the balance of SIM card
If the control panel is properly configu
balance of SIM card.
red by the installer, you can use a keypad to check the
1. Enter the user menu and press in turn:
to run 1.SIM1 CREDIT funct
card,
ion – if you want to check the balance of SIM 1
to run 2.SIM2 CREDIT function – if you want to check the balance of SIM 2
card
or will be presented on the display. To
the information, use the
,
2. The information received from the SIM card operat
and scroll through keys.
If the control panel is properly configured by the installer, you can use a keypad to top up the
6.17.2 Topping up the SIM card
SIM card.
1. Enter the user menu and press in turn:
to run 3.TOP UP SIM1 function – if you want to top up the SIM 1 card,
to run 4.TOP UP SIM2 function – if you want to top up the SIM 2 card.
2. Ente
3. Press
r the top-up code (e.g. from the scratch-card).
.
SIM card operator will be presented on the 4. The top-up information received from the
fter entering an invalid PIN code three times), you can
unblock it by entering the PUK code.
d press in turn:
display.
6.17.3 Unblocking the SIM card
If the SIM card has been blocked (a
1. Enter the user menu an
to run 5.SIM1 PUK CODE function – if you want to enter PUK code for SIM 1
card,
to run 6.SIM2 PUK CODE function – if you want to enter PUK code for SIM 2
card.
2. Enter the 8-digit PUK code.
3. Press
. The SIM card will be unblocked (the PIN code preprogrammed in the control
6. access
panel will be written to the card).
18 Service
If the alarm system is to comply with the EN 50131 standard requirements for
Grade 2, the service access should be limited.
Th the
person using the service code (installer/service technician). These rules apply to all methods
getting access to the alarm system, i.e. by using keypad, PERFECTA S
OFT program and
RFECTA C
ONTROL application.
e SERVICE ACCESS function allows you to define the rules of access to the system by
of
PE
Starting the function will display the list of options. To scroll the list, use the i keys.