SATO CL6NX - Print Mode

100
4.3 Print Mode
Backfeed
[Operation mode]
Settheprintmode.Theavailablesettingsvarydependingontheprintermodel
and installed options.
[Backfeed mode]
Specifythebackfeedoperationforthe[Operationmode]setting.Youcancongure
thissetting when[Operation mode]is setto [Cutter]or [Dispenser].Select [No
backfeed],[Beforeprinting]or[Afterprinting].
[Backfeed o󰀨set]
Youcannelyadjustthemediastoppositionduringbackfeedoperation.
[Pitch o󰀨set]
Youcannelyadjustthemediastoppositionduringforwardfeedoperation.
Cutter (CL4NX/CL6NX/CL4NX Plus/CL6NX Plus/CT4-LX/FX3-LX only)
[Type]
Specifyhowthecutteroperateswhen[Operationmode]issetto[Cutter].Select
[O󰀨],[Batch],or[Designatednumberofpages].Ifyouselect[Batch],thepageis
cutattheendoftheprintjob.
[Cut every]
Specifythenumberofpagestocutatwhen[Type]issetto[Designatednumber
ofpages].