SATO CL6NX - Command Font Settings And Usage Example

71
3.2.2 Command Font Settings and Usage Example
Commandfontisavirtualfontfordirectlysendingcommandstotheprinter.Youcanuse
featuresthatarenotdirectlysupportedbytheprinterdriver.KnowledgeofSATOBarcode
PrinterLanguage(SBPL)commandisnecessarytousecommandfont.Fordetailson
SBPLcommands,refertotheProgrammingReferenceofyourprinter.
[Name]
Setthenameofthecommandfontthatyouwanttoregister.
Thisnameisshownonthefontlistintheapplication.
[Description]
Youcanenteradescriptionofthecommandfonttoberegistered.
[Prex] [Su󰀩x]
Specifyhowthetextistobesupplied.Thespeciedtextcanbeappendedtothe
front or the end of a command.
[No prex]:Aprexisnotused.
[No su󰀩x]:Asu󰀩xisnotused.
[File]:
Prexesandsu󰀩xesareloadedfromanexternalleandappendedtothedata.
[Parsed le]:
Prexesandsu󰀩xesareloadedfromanexternalleandappendedtothedata.
Reserved variables can be included and are converted to data during printing.
[Text]:Prexesandsu󰀩xesareappendeddirectlyastext.