SATO CL6NX - Initial Setup (Startup Guide)

72
[Parsed text]:
Prexesandsu󰀩xesareappendeddirectlyastext.Reservedvariablescanbe
included and are converted to data during printing.
[Position]
Youcancontrolthepositionthatthecommandfontisinsertedintotheprintdata.
[Before page]: Thecommandisinsertedbeforethepagestarts.
[Before elements]:
Thecommandisinsertedafterthepagestartsandinfrontofallobjects.
[Element position]: Thecommandisinsertedatthepositionoftheobject.
[After elements]:
Thecommandisinsertedafteralltheobjectsandbeforethepageends.
[After page]: Thecommandisinsertedafterthepageends.
[Merge contents]
This setting is used to apply commands only the appropriate number of times to
objectsdividedmultipletimesinlinesoronthepage.
[No merge]: Anyspecialprocessingisnotperformed.
[All text on the same line]:
ApplytotextthathavethesameYcoordinatesonlyonceusingthesamefont.
Thissettingisappliedevenifonelineoftextisdividedintomultiplecharacters.
[All text on the page]:
Applytoalltextonthesamelabelonlyonceusingthesamefont.Thissettingis
usedtoapplytexttoserialdatalikeinitializationandendprocessing.