SATO CL6NX - Rfid Settings (Cl4 Nx;Cl4 Nx Plus;Cl6 Nx Plus Only)

89
3.7 RFID Settings (CL4NX/CL4NX Plus/CL6NX Plus only)
ForRFID(PJM)specicationmodels,youcanmanagetheRFIDfunction.Tousethis
function,checkthattheprinterisavailableforprintingfromthecomputerusingtheprinter
driver.ThisoperationrequiresAdministratorPrivileges.
RFID Settings
[Get Settings]
ClicktogettheRFIDsettingsoftheprinter.
[Send Settings]
ClicktosendtheRFIDsettingstotheprinter.
Clear RFID counter
[Reset]
Clicktoresettheprinter’sinternalcounter.
Note:
Youneedtorestarttheprinteraftersendingsettings.