SATO HT200e - Page 108

SECTION 6: ON LINE
SATO HT200e Page 6-3
STRUCTURE FOR COMMAND
1. Basic configuration
When command is sent to a printer, it consists of header, format No., field data, and trailer, all of
which are designated in order:
Header
･ ･ ･ ･ ･STX ･ <A>
Format No.
･ ･ Format No. and data regulating print position (format and label names)
Field
･ ･ ･ Field No., item name, parameter, and fixed data
･
･
･
･
Trailer ･ ･ ･ ･ ･ <Z> ･ ETX
Important: Some error can not be displayed up to 500 times (the number of receiving error)
because there is occasion that uncontrollable signal can be received when opening and closing
the line at a host.