SATO HT200e - Page 110

SECTION 6: ON LINE
SATO HT200e Page 6-5
3. Transmission of field parameter and field data
Field parameter specifies item name, print position, and font type, from which filed data can
be assigned for data on print.
The parameter and data shall be set on a field unit basis for sending. Up to 30 fields can be
repeatedly specified.
• Item name can be designated by 10 bytes.
• Parameter can be designated by 46 bytes.
• Fixed data can be designated by 32 bytes.
Field
No.
Item name Parameter Fixed data
NN12345678910123through46123 32
Field designation Selectable font type
Digit position 1 2 3
1: Normal 0: Normal
1: Table data
0: X1 1: X2 2: X3
4: OCR-B
2: Price 0: Normal 0: X1 1: X2 2: X3
5: Character for price
1: POP 1: POP0: POP1 1: POP2 2: POP3
3: Calendar 0: Date
1: Time
1: X2 2: X3
7: Barcode 0: Human readable
information (HRI) is NOT
available.
1: Human readable
information (HRI) is
available.
0: NW-7 1: CODE39 2: INT2of5
3: EAN13 4: EAN8 5: UPC-E
6: CODE128(C Set)
7: CODE128(A Set, B Set)