SATO HT200e - Page 74

SECTION 4 ： FREE MODE
SATO HT200e Page 4-11
ADDITIONAL INFORMATION FOR PARAMETER
1. Position of rotation
2. Print on the two colors and black-and-white reversal
1) When the print in two colors and black-and-white reversal is performed with an optional
battery, the battery consumes much more rapidly than the use in regular condition. To
solve this problem, an auxiliary AC power supply is recommended for its use.
2) If black color is pressed for a certain time to red-base label, the character will be printed in
black.
3) Do not print if the print rate exceeds 30 % or more. If it surpasses that percentage, the
print quality can not be assured.
4) In the service maintenance mode, test print will be colored in black.
3. A pattern of print in price marking
Price field Currency mark
The result of print
(“123456” are entered.)
The result of print for “7”
On 18th
digits
￡ /p UK EUROPE UK EUROPE
2
￡
￡
1234.56 ￡ 1234,56 ￡ 0.07 ￡ 0,07
2 p 123456
ｐ 123456 ｐ 7p 7 ｐ
5
￡
￡
123,456 ￡ 123.456 ￡ 7 ￡ 7
5
ｐ
123,456 ｐ 123.456 ｐ 7 ｐ 7 ｐ
6
￡
￡
1,234.56 ￡ 1.234,56 ￡ 0.07 ￡ 0,07
6
ｐ
123,456 ｐ 123.456 ｐ 7 ｐ 7 ｐ
7
￡
1,234.56 1.234,56 0.07 0,07
7
ｐ
123,456 123.456 7 7
Label to be headed
Horizontal position
90
゜
0 ゜
270 ゜
180 ゜
Vertical; position