SATO HT200e - Page 83

SECTION 4 ： FREE MODE
Page 4-20 SATO HT200e
It will go to the entry for copy.
０１ １１ : ＣＨＡＲ ＰＩＴＣＨ
7
１１２０２５０３２０
２ ０００００
０１ １２ : ＣＨＡＲ ＣＯＵＮＴ
8
１１２０２５０３２０２
０ ００００
０１ １４ : Ｖ－ＥＸＰＡＮＳＥ
9
１１２０２５０３２０２０８
０ ００
０１ １５ : Ｈ－ＥＸＰＡＮＳＥ
10
１１２０２５０３２０２０８１
０ ０
０１ １６ : ＩＮＰＵＴＣＨＥＣＫ
11 ０ : ＮＯ ＣＨＥＣＫ ▽
１１２０２５０３２０２０８１１
０
０１ １７ : ＳＥＴ ＴＩＴＬＥ
12
０ ０００００００００００００００
０１ １８ : ＴＡＢＬＥ Ｎｏ
13 １ : ＴＡＢＬＥ１ ▽
１
０ ００００００００００００００
０１ １９ : ０ ＡＵＴＯ－ＩＮＳ
14
１０
０ ０００００００００００００
０１ ２０ : ＰＲＥＳＥＴ
15 ０ : ＯＦＦ １ : ＯＮ
１０１
０ ００００００００００００
０１ ２１ : ＣＯＬＯＲ
16 ０ : ＢＬＡＣＫ ３ : ＲＥＤ ▽
１０１１
０ ０００００００００００
Value in one digit can be entered for spacing between
characters: Select the value from “0” to “9”.
Value in 2 digits can be entered for the number of
characters: Select the values from “01” to “32”.
Value in one digit can be entered for the magnification
of vertical expansion: Select the value from “1" to”4”.
Value in one digit can be entered for the magnification
of horizontal expansion: Select the value from “1" to”4”.
Value in one digit can be entered for the input check:
Select “0” or “2”.
Title can be displayed:
(Note: It will be displayed in only one field per format.)
Value in one digit can be entered for the table No.:
Select the value from “1”, “2”, and “3”.
Value in one digit can be entered for with or without
0 insertion: Select “0” or “1”.
Value in one digit can be entered for preset:
Select “0” or “1”.
Value in one digit can be entered for print color.
Select from “0”, “3”, and “4”.