SATO TH2 Series - External Rewinding Unit Specifications

Section 6: Basic Specifications
TH2 Series Operator Manual Page 6-7
6.2 OPTIONAL ACCESSORIES SPECIFICATIONS (Cont’d)
EXTERNAL REWINDING UNIT SPECIFICATIONS
Rewinding Method
Using Paper core size φ 40 mm (1.5”) or POS cassette
Rewinding Direction Face-out
Rewind
Capacity
Paper core 70 mm (2.76") maximum diameter
POS cassette 50 mm (1.97") maximum diameter
Media Type Label only
Media Size
Paper core
Width including liner: 32 to 48 mm (1.3” to 1.9")
Pitch including liner: 19 to 181 mm (0.7” to 7.1")
POS cassette
Width including liner: 33 mm (1.3")
Pitch including liner: 25.4 mm (1"), 50.8 mm (2")
Thickness 0.07 to 0.265 mm (0.003” to 0.01")
Media Detection No detection of label or label end
Dimensions
135 mm (W) X 115 mm (D) X 128 mm (H)
5.3” (W) X 4.5” (D) X 5” (H)
Weight 0.7 kg (1.5 lbs)