SATO TH2 Series - Operating Modes

Section 3: Configuration and Operation
Page 3-8 TH2 Series Operator Manual
3.2 OPERATING MODES
The operating status of this printer can be set to one of the following modes:
1. PRINT menu
I---->1.Format
I------> • FMT[ ]
I---->2.Table
I------> • ID[ ]
I---->3.On-line
2. MAIN menu
I---->1.Print
I---->2.Settings
3. SETTINGS menu
I---->1.Application
I------> • 1.Edit
--> • 1.Format
--> • 2.Table
--> • 3.F1
I------> • 2.Mode
I---->2.Printer
I------> • 1.Profile
--> • 1.Select
--> • 2.Create
--> • 3.Delete
--> • 4.Print
I------> • 2.Media
--> • 1.Size
--> • 2.Sensor Type
--> • 3.Calibrate
--> • 4.Max feed
I------> • 3.Print Ctrl
--> • 1.Speed
--> • 2.Darkness
--> • 3.Media Handl.
--> • 4.Backfeed Mod
--> • 5.Adjustment
--> • 6.Image
--> • 7.Head check
--> • 8.Auto Feed
I------> • 4.System
--> • 1.Display
--> • 2.Sound
--> • 3.Auto Off
--> • 4.Test
I------> • 5.Regional
--> • 1.Lamguage
--> • 2.Time
--> • 3.Date
--> • 4.Unit
I------> • 6.Network
--> • 1.LAN
--> • 2.WLAN
4. ADV SETUP (Advance Setup) menu:
I---->1.Start App.
I------> • 1.Standard
I---->2.Setup
I------> • 1.Profile
I------> • 2.Media
I------> • 3.Print Ctrl
I------> • 4.System
I------> • 5.Regional
I------> • 6.Network
I---->3.Hex Dump
I------> • 1.Printout
I------> • 2.To File
I---->4.Change PW
I------> • 1.admin
I------> • 2.manager
I---->5.Reset
I------> • 1.Setup
I------> • 2.SD Card
I---->6.Console
I---->7.USB
I------> • 1.Number
I---->8.Disp adj./ Cutter adj.
I---->9.Continue
I------> • PRINT menu
<F1 button shortcuts>
5. F1
I---->1.Print Copy
I---->2.Symbols
I---->3.Preview
I---->4.Time Offset
I---->5.Profiles
I---->6.Setup/
I---->7.Info
I---->8.Backup