SATO TH2 Series - Basic Specifications of Wireless LAN

Section 7: Interface Specifications
Page 7-4 TH2 Series Operator Manual
7.3 LOCAL AREA NETWORK (LAN) ETHERNET AND WIRELESS LAN (cont’d)
7.3.2 Basic Specifications of Wireless LAN
The Wireless LAN interface is available with Type 3 board.
Wi-Fi
1)
2)
3)
4)
5)
6)
7)
8)
Standard
IEEE802.11b/g
Frequency
2.4GHz
Transfer rate
Max. 11Mbps (IEEE802.11b)
Max. 54Mbps (IEEE802.11g)
W-LAN communication mode
Infrastructure mode
Ad hoc mode
Channel
1 to 11 ch
SSID
Alphanumeric up to 32 characters
(except for ',' (comma), '"' (double quotation) and / (backslash)
Authentication method
None
IEEE802.11 (authenticaion with access points)
WEP (Open System / Shared Key)
IEEE802.11 (authentication between W-LAN devices)
WPA (PSK (Pre-Shared Key) or IEEE 802.1x authentication)
WPA2 (PSK (Pre-Shared Key) or IEEE 802.1x authentication)
IEEE 802.1x (EAP-LEAP, EAP-TLS, EAP-PEAP, or EAP-TTLS)
(Herein after called “EAP”)
Encryption method
None
WEP key
TKIP
AES