SATO TH2 Series - Basic Specifications; Printer Specifications

Section 6: Basic Specifications
TH2 Series Operator Manual Page 6-1
BASIC SPECIFICATIONS
6.1 PRINTER BASIC SPECIFICATIONS
• The above dimensions and weight are excluding the battery pack.
MODEL NAME
TH208
PHYSICAL CHARACTERISTICS
Width 132 mm (5.2”)
Height 147 mm (5.8”)
Depth 194 mm (7.6”)
Weight 1.7 kg (3.7 lbs.)
POWER SUPPLY
AC Adapter Voltage
Input power voltage: AC 100V - 240V, 50/60 Hz, +/-10% (Full range)
Output voltage: DC 19V, 3.6A
Power Consumption
At peak: 42.5W / 64.0VA (Print ratio 30%)
In standby: 6.2W / 12.6VA
ENVIRONMENTAL (EXCLUDING MEDIA)
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature -5°C to 60°C (23°F to 140°F)
Operating Humidity 30 to 80% RH, Without condensation
Storage Humidity 30 to 90% RH, Without condensation
PRINT
Method Direct Thermal
Print Speed (selectable)
50 to 100 mm/sec (2 to 3.9 Inch/sec)
(Setting value: 50, 75, 100 mm/sec)
*Print speed varies depending on the type of media used.
Resolution 8 dots/mm (203 Dots Per Inch)
Maximum Print Width 56 mm (2.2”)
Maximum Print Length 156 mm (6.1 “)
Print darkness Darkness level: 1 to 5
Label issuing mode
Standard: Continuous mode, Dispenser mode, Tear-off mode, Sensor off mode
Option: Cutter mode, Linerless mode (with cutter), Linerless mode (without cutter)