SATO TH2 Series - Page 13

Section 1: Introduction
TH2 Series Operator Manual Page 1-5
1.3 PARTS IDENTIFICATION (cont’d)
15
14
16
17
18
Back view
Media inlet
An opening for Fan-folded media or media
from unwinder to feed in to the printer.
Handle
To carry the printer around.
DC input power connector
Supplies power to the printer by inserting the
power cable of the AC adapter.
LAN interface connector*
To connect printer to the host computer using
LAN interface.
USB interface connector*
To connect printer to the host computer using
the USB interface.
* The availability of the interface connector
depends on the type of printer you purchased.
14
15
16
17
18