SATO TH2 Series - Page 54

Section 3: Configuration and Operation
Page 3-28 TH2 Series Operator Manual
3.6 APPLICATION MENU (Cont’d)
Menu Description
Displays input range and input field.
Enables input of image horizontal position.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Displays input range and input field.
Enables input of image vertical position.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Displays input range and input field.
Enables input of image field horizontal magnification.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Displays input range and input field.
Enables input of image field vertical magnification.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Enables the selection of anchor point of the image field.
TOP_LEFT, TOP_CENTER, TOP_RIGHT can be selected.
Enables selection of SOURCETYPE for the new field.
Fix, Table, Counter, Copy, Script, Time, Input or Select can be selected.
Displays search field and a list of images available in the printer.
Enables selection of images using input in search field or scrolling with the ,
arrow buttons and enter button.
Existing images are pre-loaded and can be used in formats. The ones listed are
for demo formats.
New images can be loaded from a host or AEP Works.