Scanreco RC400 G3B User Manual

Note that on the MAXI platform the Terminals 1 and 2 are mirrored and available on both left and right hand side of the
stop button
5.2 Portable Control Unit MAXI digital inputs
ThedigitalinputsavailableareNOTallbydefaultassignedandigitaloutputontheCentralUnit,
 belowguresonlydeclaresdigitalinputaccess.
No. Type Colour
code
AMP
Pin no.
- Common (GND) Black 1
10 Digital input 33 Pink 2
9 Digital input 06 Grey 3
8 Digital input 02 Brown 4
7 Digital input 32 Purple 5
6 Digital input 05 Orange 6
5 Digital input 31 Black 7
4 Digital input 07 White 8
3 Digital input 04 Blue 9
2 Digital input 03 Green 10
1 Digital input 01 Yellow 11
- Supply output Red 12
No. Type Colour
code
Amp
Pin no.
- Common (GND) Black 1
20 Digital input 36 Pink 2
19 Digital input 35 Grey 3
18 Digital input 34 Brown 4
17 Digital input 37 Purple 5
16 Digital input 08 Orange 6
15 Digital input 09 Black 7
14 Digital input 13 White 8
13 Digital input 12 Blue 9
12 Digital input 11 Green 10
11 Digital input 10 Yellow 11
- Supply output Red 12
1-12 1-12
1-121-12
Terminal 2
Terminal 1
Document type Document number PageRev
Service Manual S071 C 16 of 46

Scanreco RC400 G3B Specifications

General

Brand	Scanreco
Model	RC400 G3B
Category	Remote Control
Language	English