Scanreco RC400 G3B User Manual

2.1 General information
•Remotelycontrolledcranesmayonlybeoperatedbyqualiedpersonnel.The
driver must be aware of the contents of chapter 4 “Safety regulations and
Operating instructions” available in the Intruction Manual before operation is started.
Serious accidents may occur if these instructions are not followed.
•Toprotecttheportablecontrolunitfromdamageandforsafetyreasons,the
control unit must be kept in a locked cabin
•Followtheinstructionsgiveninthecranehandbookregardingmovingthe
cranefromitsparkingposition,thebestarmpositioningwhileloadsarebeing
handled and parking of the crane.
•Duetotheunlimitedvarietyofcranes,machines,objects,vehiclesand
equipmentonwhichtheremotecontrolsystemareused,andthenumerous
standardswhicharefrequentlythesubjectofvaryinginterpretation,itis
impossible for the personnel at Scanreco to provide expert advice regarding
thesuitabilityofagivenremotecontrolforaspecicapplication.Itisthe
responsibility of the purchaser to determine the suitability of any Scanreco
remote control product for an intended application and to insure that it is
installedandguardedinaccordancewithallcountry,federal,state,local,and
privatesafetyandhealthregulation,codes,standardsandScanreco
recommendation (this manual). If the Scanreco RC 400 G2B/G3B will be used in a
safetycriticalapplication,thecustomer/drivermustundertakeappropriate
testing and evaluation to prevent injury to the ultimate user. Scanreco does
not take responsibility for any damage or injury.
•UnauthorizedtamperingwithaScanrecoremotecontrolsystemautomaticallyinvalidates
guarantee.
This manual is intended as a complement to the crane / machine instruction book
and covers the Scanreco RC 400 G2B/G3B Remote Control System.
The Scanreco RC 400 G2B/G3B offers the driver an extremely advanced remote control
systemwithspeed,precision,controlandmaximumsafety.
In order to ensure your safety and the safety of your crane / machine you should
study and learn these instructions. This will enable you to quickly familiarise yourself
with your new remote control system and how to utilise it.
2 Preface
Document type Document number PageRev
Service Manual S071 C 6 of 46

Scanreco RC400 G3B Specifications

General

Brand	Scanreco
Model	RC400 G3B
Category	Remote Control
Language	English