Chapter 4: Maintenance
Supplies and Consumables
86 Scantron
i
NSIGHT 20 Scanner
IMPORTANT:
• Staticide wipes contain isopropanol which can cause
eye irritation and dry skin. Wash your hands with soap
and water after performing maintenance procedures.
Refer to the Material Data Safety Sheet (MSDS) for
more information. See below.
• Emulsiclean wipes contain sodium lauryl ether sulfate
and sodium silicate which can cause eye irritation.
Refer to the MSDS for more information. See below.
• Do not use canned/compressed air.
• Allow all tires and rollers to dry completely before
using the scanner.
• Do not use cleaners on hot surfaces. Allow surfaces to
cool to ambient temperature before use.
Material Safety Data Sheets (MSDS)
Material Safety Data Sheets (MSDS) for chemical
products are available on the Scantron Support Web site at
www.scantron.com/support. When accessing the
MSDSs from the Web site, you will need the part number
for the part or consumable. See “Supplies and
Consumables” on page 85 of this guide for a list of
consumables and their part numbers.
To Next Page
Loading...
