Schweitzer Engineering Laboratories SEL-2020 - Page 103

Date Code 20010518 “Job Done” Examples - (Example 2) 4-21
SEL-2020 Instruction Manual
3. Use the SET A command to enable printing of unsolicited messages on Port 9 and to clear
the buffers after printing.
You should see the following screen:
*>>SET A 9<ENTER>
SET A 9<ENTER>SET A 9<ENTER>
SET A 9<ENTER>
Automatic message settings for Port 9
Port Startup String
STARTUP =""
? <ENTER>
<ENTER><ENTER>
<ENTER>
Auto-message Settings
How many auto-message sequences (0-12) MSG_CNT = 0 ? 1<ENTER>
1<ENTER>1<ENTER>
1<ENTER>
Print all buffered unsolicited messages (Y/N)PRINT_ALL= N ? Y<ENTER>
Y<ENTER>Y<ENTER>
Y<ENTER>
Clear unsolicited message buffer after print (Y/N)CLEAR_BUF= N ? Y<ENTER>
Y<ENTER>Y<ENTER>
Y<ENTER>
Size of user-defined data space in registers USER = 0 ? <ENTER>
<ENTER><ENTER>
<ENTER>
STARTUP =""
MSG_CNT = 1
PRINT_ALL= Y
CLEAR_BUF= Y
USER = 0
Save changes (Y/N) ? Y<ENTER>
Y<ENTER>Y<ENTER>
Y<ENTER>
Port 9 Settings Changed
*>>
Notes:

Your printer may require a power-up initialization. If it does, you enter it as a startup
string. The startup string is issued to the printer when you power up the SEL-2020.
You enable printing unsolicited messages and set the SEL-2020 to clear the unsolicited
message buffers as the messages are printed. The PRINT_ALL setting automatically
gives the printer access to unsolicited messages received and stored on all ports.
