SEAWARD PRIMETEST SERIES USER MANUAL
TESTED. TRUSTED… WORLD WIDE Page 37 of 77
Add Test function (F2). This will add a new test directly under the currently selected test.
Delete Test function (F3). This will delete the highlighted test from the test sequence.
Edit Test function (F4). This will edit the highlighted test.
Use F5 this to return to the previous window without saving.
To edit the name of the sequence press the Edit button (F4). You can then give it a relevant
name and press the save button to store (F4).
Press the Add Test button (F2) to add a test or inspection to the sequence. Use the keyboard
arrow keys to select which test or inspection you would like to add from the list and the pass / fail
limits or select the user test option - Accept using button (F4).
Note: If you select the Custom User Test option you will then need to give it a name from the
dropdown or by free typing into the box. You can then add the units of what you would like to record
if relevant and press the save button (F4) to store.
Repeat until you have added all of the required steps.
Once complete press the Back button (F5) and then select Yes by pressing the Y key when
asked if you want to save changes.
The newly created Test Sequence can be moved up or down using the function keys (F2) or
down (F4).
Return to the Home screen (F1). Select (F1) and then Auto test (F2), your new Test
Sequence will be available from the dropdown list.
To Next Page
Loading...
Need help?
General
