Operating seca connect 103 • 31
17-10-01-266-002a/07-2018B
5.2 Managing seca measuring devices
Preparing a seca measuring device Presets need to be defined on the seca measuring device to ensure reliable
system function.
NOTICE!
Malfunction and incorrect data allocation
Incorrect or incomplete settings on seca measuring devices can lead
to the transmission of invalid measured values, incorrect allocation of
measured values, or malfunctions in the system or in individual
measuring devices.
► Ensure that all seca measuring devices to be connected are
correctly configured.
► Follow the instructions for use for the respective seca measuring
device.
1. Make the following settings on the seca measuring device:
2. Ensure that the seca measuring device is
not connected to the following
devices:
• Stadiometer:
seca 274, seca 264
• Wireless printer: seca 465, seca 466, seca 467
• Wireless printer from third parties
3. Continue based on the type of seca measuring device (➔ Compatible
seca measuring devices):
► Devices with an internal interface module, for example:
seca 336 i:
continue with section ➔ Adding a seca measuring device
► Device requires
seca 452 interface module: continue with section
➔ Connecting and installing the seca 452 interface module
➔ Preparing a seca measuring device
➔ Adding a seca measuring device
➔ Changing a setting of a seca measuring device
➔ Exporting the device list
➔ Deleting a device
Function Setting Device type
Autohold On All
seca 360° wireless
a
a. For the seca 285/seca 284 measuring stations, this function must re-
main activated to be able to transmit length measured values from the
head slide to the multi-functional display.
Off
seca 360° wireless
measuring devices
To Next Page
Loading...
Need help?
General
