Seca 103 - Retrofitting Column Scale 704

56 • secaconnect 103/seca 452
17-10-01-266-002a/07-2018B
6. Screw the bracket securely to the wall with two cross-head screws.
7. Press the wired
seca 452 interface module into the bracket.
8. Perform the necessary final work, ➔ Performing final work.
6.6 Retrofitting column scale 704
The seca 703 column scale cannot be retrofitted by the customer. Please
contact seca Service to retrofit the
seca 703.
You need the following parts from set no. 4520050009:
➔ Preparing the scale
➔ Mounting the seca 452 interface module
➔ Installing the scanner bracket
➔ Connecting a seca 452 interface module
➔ Performing final work
Pos. Component Pcs.
a
seca 452 interface module 1
b Bracket 1
c Column bracket 1
d Scanner bracket 1
e Power supply unit 1
f Connecting cable, short 1
g Cross-head screw 2
h Hex head socket screw 2
a
c
d
e
f
g
b
h