34 • secaconnect 103/seca 452
17-10-01-266-002a/07-2018B
Changing a setting of a seca
measuring device
The Change device settings dialog window is automatically active when you
click a seca measuring device in the Device list. Settings for seca measuring
devices that are
Offline cannot be changed.
1. In the
Device list, click on the seca measuring device whose setting you
would like to change.
The settings of the seca measuring device are shown under
Device
settings
.
2. Change the settings for the seca measuring device (compare to the
section ➔ Adding a seca measuring device).
The QR code is automatically generated.
3. Scan the QR code with the scanner that is connected to the seca
measuring device or to the respective
seca 452 interface module.
The settings are transferred to the seca measuring device or the
respective seca 452 interface module.
4. Repeat the procedure for all seca measuring devices whose settings you
want to change.
To Next Page
Loading...
