Seca 103 - Preparing the Scale

42 • secaconnect 103/seca 452
17-10-01-266-002a/07-2018B
NOTE
•The
seca 452 interface module is connected between the cabled
remote display and the scale. Select the short or long connecting
cable, depending on the distance of the cabled remote display to
the scale.
• The scanner brackets from the
seca 452 sets are not intended for
wall installation. Use a suitable scanner bracket from the scanner
manufacturer. Follow the instructions in the respective installation
instructions.
Depending on the installation and connection version, you may need the
following tools (not included in the scope of delivery):
Preparing the scale 1. Switch off the scale.
2. Disconnect the power supply unit from the power supply socket.
3. Pull the power cable out of the scale.
f Cross-head screw 2
Pos. Component Size Pcs.
1 Cross-head screwdriver PH 1 1
2 Cross-head screwdriver PH 2 1
3 Drill Ø 5 mm 1
4 Wall plug Ø 5 mm 2
5 Ethernet cable n/a 1
Pos. Component Pcs.
1
2
3
4
5