Seca 103 - Connecting a Seca 452 Interface Module

44 • secaconnect 103/seca 452
17-10-01-266-002a/07-2018B
Connecting a seca 452 interface
module
1. Connect the scale to the seca 452 interface module:
a) Remove cable of cabled remote display from the scale
b) Connect the connecting cable to the connection of the electronics
box
c) Connect the connecting cable to interface 1 of the
seca 452
interface module
d) Connect cable of cabled remote display to interface 2 of the
seca 452 interface module
You have the following options to continue:
► For communication via Ethernet, continue with step 2.
► For communication over WiFi, continue with step 3.