Secutron MR-2300T User Manual

88
11.11.6 Command Menu/Dialer Config-->Dialer Enable/Disable
11.11.7 Command Menu/Dialer Config-->Ring Detect
15 12:00
12:00 p.m. and 12:00 a.m.
every day except on the
15th of the month
12:00 p.m. and 12:00 a.m.
on the 15th of the month
Note: Refer to section 11.2.1 on page 64 for detailed instructions on making menu
selections.
[X] ENABLE ->Default
[ ] DISABLE
The dialer is enabled by
default. When the dialer is
enabled or disabled, a
warning message appears.
Warning: The dialer cannot
report any event to the
monitoring station if it is
disabled.
[ ] Disabled
[ ] 1
[ ] 2
[ ] 3
[ ] 4
[X] 5->Default
[ ] 6
[ ] 7
[ ] 8
Use this menu item to
select the number of rings
on which the panel’s
modem answers. The
default number of rings is
five. The maximum number
of rings you can define is
eight.
If you select the “Disabled”
option, the modem is
disabled and the panel
does not pick up the
incoming call.
Table 16 Auto Test Time and Cellular Report Date (Continued)
Cellular Report Date Auto Test Time Line 1 Tested Line 2 Tested
i
Dialer Ena/Dis
[X] ENABLE
------Warning-------
Dialer Disabled!!!
[X]5
-Ring Detect Number-

Secutron MR-2300T Specifications

General

Brand	Secutron
Model	MR-2300T
Category	Control Panel
Language	English