− 112 −
⑦ Removethe4trussscrewsholdingthe
leftandrightsidesoftherearsteering
coverinplace.
TRUSSSCREW(4),black
M4×6
PHOTO11.1f
⑧ Pushtherearsteeringcovertowardstheinteriorofthemachine,pressingdownonthe
accordion-foldbehindthecover.TheY-axisVRshouldnowbevisibleinsidethecover,onthe
leftsidewhenfacingthemonitor.
NOTE:Thesteeringunithasbeenremovedinthisphotographforbettervisibility.Itisnot
necessarytoremovethesteeringunitwhenperformingtheactualoperation.
PHOTO11.1g
SCREW(2)
M4×8,w/flat&springwashers
DCUTSIDE
Installedhorizontally.