2
HANDLING PRECAUTIONS
●FortheICboardcircuitinspections,onlythelogictesterisallowed.Theuseofa
multiple-purpose tester is not permitted, so be careful in this regard.
●Static
electricityfromyourbodymaydamagesomeelectronicsdevicesontheIC
board. Before handling the IC board, touch a grounded metallic surface so that the
static electricity can be discharged.
●Some
partsaretheonesdesignedandmanufacturednotspecicallyforthisgame
machine.Themanufacturersmaydiscontinue,orchangethespecicationsof,
such general-purpose parts. If this is the case, SEGA cannot repair or replace a
failed
gamemachinewhetherornotawarrantyperiodhasexpired.
●DonotrepeatedlyturnthepowerON/OFFinashortperiodoftime.Doingsomay
result in breakdown or parts damage.
●Be
carefulnottodropfasteners(screws,nuts,etc.)insidethecabinet.Doingso
may result in breakdown or parts damage.
●This
productusesanLCD.BecarefulwhencleaningtheLCDasitiseasily
scratched. For details, see Chapter 12 “LCD”.
● Wheneveranyfasteners(e.g.screws,nuts)havebeenlost,alwaysuse
replacementfastenerswithproperdimensionsasspeciedinthisdocument.
If fasteners of any other dimensions are used, it could cause damage and/or
separation of parts that result in secondary accidents.
● Specication
changes,removalofequipment,conversionand/oraddition,not
designated by SEGA are not permitted.
- Failure
toobservethismaycauseareoranelectricshock.Non-compliance
withthisinstructioncanhaveabadinuenceuponphysicalconditionsofthe
players or the onlookers, or result in injury during play.
- SEGA shall not be held responsible for damage, compensation for damage to a
third
party,causedbyspecicationchangesnotdesignatedbySEGA.
● Performingworkorpartsreplacementsnotdescribedinthismanualcould
result in accidents. If the need to perform such work arises, use the contact
information listed in this manual or contact the location where the product was
purchased
torequestservice.Youmayalsoinquireaboutdetailsoftheworkto
be performed.
● Be
suretoperformperiodicmaintenanceinspectionshereinstated.
1