43
GAME TEST MODE
11-3 INPUT TEST
View the status of input devices. Use this screen to perform periodic checks on input devices.
INPUT TEST screen
- Input devices are working correctly if the corresponding menu item switches from “OFF” to “ON” when the
device is operated.
- Press the TEST and SERVICE Buttons simultaneously to return to the GAME TEST MENU screen.
■Controls
■Menu Items
1P CONT X Normal if the displayed value changes accordingly when the 1P controller is
moved left and right.
Pointing the controller to the right decreases the value, while pointing it to the
left increases the value.
1P CONT Y Normal if the displayed value changes accordingly when the 1P controller is
moved up and down.
Pointing the controller down decreases the value, while pointing it up
increases the value.
1P CONT TRIGGER_L Normal if the display changes from “OFF” to “ON” when the left trigger on
the 1P controller is pulled.
1P CONT TRIGGER_R Normal if the display changes from “OFF” to “ON” when the right trigger on
the 1P controller is pulled.
1P START BUTTON Normal if the display changes from “OFF” to “ON” when the 1P START
button is pressed.
2P CONT X Normal if the displayed value changes accordingly when the 2P controller is
moved left and right.
Pointing the controller to the right decreases the value, while pointing it to the
left increases the value.
INPUT TEST
1P CONT X *
1P CONT Y *
1P CONT TRIGGER_L OFF
1P CONT TRIGGER_R OFF
1P START BUTTON OFF
2P CONT X *
2P CONT Y *
2P CONT TRIGGER_L OFF
2P CONT TRIGGER_R OFF
2P START BUTTON OFF
MOTION STOP OFF
TEST OFF
SERVICE OFF
SW1 OFF
SW2 OFF
PRESS TEST AND SERVICE BUTTON TO EXIT
11