79
FLUORESCENT LAMP AND LAMP REPLACEMENT
15
FLUORESCENT LAMP AND LAMP REPLACEMENT
● Thisworkshouldbeperformedbysitemaintenancepersonnelorotherskilled
professionals.Workperformedbynon-technicalpersonnelcancauseasevere
accident such as an electric shock.
● When
workingwiththeproduct,besuretoturnthepoweroff.Workingwiththe
power on may cause an electric shock or short circuit.
● When
assembling,besuretousepluralpersons.Dependingontheassembly
work, there are some cases in which working by one person alone can cause
personal injury or parts damage.
● Use
lampsofthespeciedratings.Usinglampswithdifferentratingsmaycause
resordamage.
● Thereisthedangerofshortcircuitsorsmokegenerationduetodeteriorationof
insulationinlightingxturesresultingfromagedeterioration.
Check for anomalies such as the following:
Does it smell like something is burning?
Is there socket discoloration?
Are any lamps being replaced frequently?
Do lamps not go on properly?
● Youmaygetburnedbyahotuorescentlamporotherlamps.Payfullattention
to the lamps when performing the work.
● When
replacingauorescentlamporotherlamps,becarefulnottoplacetoo
much stress on the glass part. Doing so could cause it to break, and broken
pieces may cause personal injury.
● Hold
thepartsrmlywhileremovingtheafxingscrews.Whenalltheafxing
screwsareremoved,thepartcouldfalloff,resultinginanaccident.
● Toperformtheoperationsafelyandaccuratelyyoumustusesteadystepstool.
Working without this may lead to a fall and possible injury.
● Be
carefulwhenhandlingtheplasticparts.Donotapplyexcessiveforceor
shocktotheseparts.Failuretoobservethisinstructionmayresultinbreakage,
and broken pieces and cracks or chips in these parts may cause personal injury.
15