37
User Manual
T-59.09/T-59.05:
[TRACK] + "Config" + [ENTER] + "TIME STEP" + [ENTER]
Selecting Track Color
To select among 8 different line colors that you choose for the Track:
[MENU] + "Track" + [ENTER] + "Config" + [ENTER] + "Color" + [ENTER]
T-59.09/T-59.05:
[TRACK] + "Config" + [ENTER] + "Color" + [ENTER]
The same Track can be saved with any color.
Displaying Track
To enable or disable the Track displaying on the map screen:
[MENU] + "Track" + [ENTER] + "Config" + [ENTER] + "Display Mode" +
[ENTER] + "Visible"/"Hidden" + [ENTER]
T-59.09/T-59.05:
[TRACK] + "Config" + [ENTER] + "Display Mode" + [ENTER] + "Visible"/
"Hidden" + [ENTER]
Activating/Deactivating Track Recording
To activate or deactivate the Tracking of the vessel while the vessel is moving:
[MENU] + "Track" + [ENTER] + "Activate"/"Deactivate" + [ENTER]
T-59.09/T-59.05:
[TRACK] + "Activate"/"Deactivate" + [ENTER]
Clearing Track
All the Track or part of it can be cleared from the screen:
[MENU] + "Track" + [ENTER] + "Delete" + [ENTER]
T-59.09/T-59.05:
[TRACK] + "Delete" + [ENTER]
[Begin]
1
, [End]
1
and [Whole]
1
allow to identify the start or the end point of the
segment to delete.
NOTE
1
FOR T-59.09, press [1, Begin], [2, End] and [3, Whole].
Selecting Track Number
The chart plotter has the capability to store up to 5 Tracks. To select a Track:
[MENU] + "Track" + [ENTER] + "Config" + [ENTER] + "Active Track" +
[ENTER] + use the cursor key to select the number + [ENTER]
T-59.09/T-59.05:
[TRACK] + "Config" + [ENTER] + "Active Track" + [ENTER] + use the cur-
sor key to select the number + [ENTER]
TRACK TO ROUTE FUNCTION
This function creates a Route from a pre-recorded Track. To select this menu:
[MENU] + "Track" + [ENTER] + "Track To Route" + [ENTER]
T-59.09/T-59.05:
[TRACK] + "Track To Route" + [ENTER]
A new window appears on the screen with the following options.
Track To Route
Executes the function that converts the given Track into a Route.
[MENU] + "Track" + [ENTER] + "Track To Route" + [ENTER] + "Track To
Route" + [ENTER]