98 User Manual
♦ Route Data Report and User Points (Marks/Waypoints) List pages
♦ Display vessel's position, direction and Track
♦ Alarms Handling (Auto Off, Arrival Alarm, XTE Alarm, Anchor Alarm,
Depth Alarm, HDOP Alarm, Heading Alarm, Grounding Alarm, External
Alarm)
♦ Man OverBoard (MOB) to navigate back to a missing person or object
♦ C-Link and C-Weather Service
♦ R-B function
♦ Simulation Mode with cursor control
NOTE
1
If Fish Finder connected.
TECHNICAL SPECIFICATIONS
♦ Power consumption :625 mA max, @ 12 V
♦ Interface :NMEA-0183
♦ Autopilot Interface : NMEA-0180, NMEA-0180/CDX, NMEA-
0183
♦ Display :Sun Light Viewable Color LCD (active area 5")
♦ Display Resolution :240 x 320 pixels
♦ MEDIA :C-Card
♦ Cartography :C-MAP BY JEPPESEN DATA MEDIA
♦ Operating temperature range :32 to 131 °F (0 to 55 °C)
♦ Memory : Non volatile
♦ Keyboard :Silicon rubber, backlight
♦ Weight (with external bracket) : 600 gr. (TM5i)
550 gr. (TM5e)
When the package containing the chart plotter is first opened, please check it for
the following contents (if any parts are missing contact the dealer the chart plot-
ter was purchased from):
♦ Bracket and I/O cable 1,5 mt/5.9 feet
♦ Chart plotter's protective cover
♦ Fuse 2 Amp. + fuseholder
♦ User Manual
♦ Cutting template (TM5e)
♦ Smart DGPS WAAS Receiver with cable 15 mt/45 feet (TM5e)
MEDIA INSERTING/REMOVING PROCEDURE
Inserting the MEDIA
Remove the front cover as explained in the following figure. Hold the MEDIA by
the long inclined side so that you can see the C-MAP BY JEPPESEN label. Gently push
the MEDIA into the slot; push the MEDIA in as far as it will go to hold fixed into the
slot and place the front cover again.
To Next Page
Loading...