72 User Manual
♦ External Route : Name of the External Route (from
$PCMPN,0)
♦ Cruising Speed : Planned Cruising Speed (from $PCMPN,1)
♦ Total Route length : Length from First to Last Wpt (from
$PCMPN,1)
♦ Waypoints in Route : No. of Wpts in the Route (from $PCMPN,1)
♦ Remaining Waypoints : No. of Wpts from Dest to Last Wpt (from
$PCMPN,1)
♦ Fuel Consumption Rate : Planned Fuel Consumption Rate (from
$PCMPN,1)
♦ Total Fuel Consumption : Calculated Fuel consumption to navigate
the whole Route
♦ Initial Fuel Load : Volume of Fuel available before the navi-
gation was started (Liters)
♦ Remaining Fuel : Volume of Fuel available (Liters)
♦ Distance to Destination : Distance from Ship to Destination (calcu-
lated)
♦ Distance to Next Wpt : Distance to travel from ship to the Wpt
after the Destination (calculated: Distance
to Dest + Next Route Leg length)
♦ Distance to Last Wpt : Distance to travel from ship to the End of
the Route (calculated: Distance to Dest
+Distance From Dest to last Wpt received
from $PCMPN,1)
♦ TTG To Destination : Estimated Time to travel the “Distance to
Last Wpt” (calculated using Cruising
Speed)
♦ TTG To Next Wpt : Estimated Time to travel the “Distance to
Next Waypoint” (calculated using Cruis-
ing Speed)
♦ TTG to Last Wpt : Estimated Time to travel the “Distance to
Last Wpt” (calculated using Cruising
Speed)
♦ ETA to Destination : Estimate Time of Arrival to the Destina-
tion Point (calculated: Current Time +
“TTG To Destination”)
♦ ETA to Next Waypoint : Estimate Time of Arrival to the Waypoint
after the Destination (calculated: Current
Time + “TTG To Next Waypoint”)
♦ ETA to Last Wpt : Estimate Time of Arrival to the End of the
Route (calculated: Current Time + “TTG
To Last Wpt”)
To Next Page
Loading...