Sekonic LITEMASTER PRO - Page 10

10
c) To unlock the connector on the JR10-901(JR20-901)PCB / 1 Assy and remove the Flexible Cable of
the JR10-129 LCD Assy.
d) To unlock the connector on the JR10-901(JR20-901)PCB / 1 Assy and remove the Flexible Cable of
the JR10-123 Wire Harness / D Fold Assy.
e) Remove the 2 screws securing the JR10-901(JR20-901)PCB / 1 Assy in place. (ZA348 2pcs.)
* The screw tightening torque is to be 7~9c*N*m（6.9~8.8kg*cm）
f) Remove the 2 screws securing the JR10-124 PCB Holder Part Assy (2pcs.) in place.
(ZA348 2pcs.)
Remove the PCB Holder Part Assy.
* The screw tightening torque is to be 7~9c*N*m（6.9~8.8kg*cm）
JR10-129 LCD Ass
y
Flexible Cable
JR10-901(JR20-901) PCB/1 Assy
Connectors
Make a locking member (black
part) and remove the flexible
cable
JR10-901(JR20-901) PCB/1 Assy
Connectors
JR10-123
Wire Harness / D Fold Assy.
Make a locking member
(White part) and remove
the flexible cable
ZA348(M1.7×6)
(two screws )
JR10-901(JR20-901)
PCB / 1 Assy