Sekonic LITEMASTER PRO - Page 12

12
・Wire Harness / K (JC109011：Brown), Wire Harness / L (JC109012 : Red), Wire Harness / M
(JC109013 : Green), Wire Harness / 1 (JR109001 : White), and Wire Harness / 2 (JR109002 :
Blue) are soldered to a PCB / 1 Assembly (JR10-901 / JR20-901).
A Wiring Protection Part is pressed against a euphotic part after soldering.
From left-hand side
Wire Harness / K ： Brown
Wire Harness / L ： Red
Wire Harness / M ： Green
From a top
Wire Harness / 1 ： White
Wire Harness / 2 ： Blue
JR101240
Wiring
Protection Par
t
The end face of a tube i
s
hooked on the end face of
a
LCD Holder Stay Assembly.
The projection portion of LCD
Holder Stay Assembly is put int
o
the hole of a LCD Assembly.
Ａ Expansion
The projection portion o
f
LCD Holder Stay Assembly
The hole of LCD
A
ssembl
y
B Expansion
The projection portion o
f
LCD Holder Stay Assembl
y
is put into the hole of a
LCD Assembly.
The hole of LCD Assembly
The projection portion
of LCD Holder Stay
A
ssembl
y