ADN Digital Conference System | 149
Updating the firmware of the conference system
Updating the firmware of the
conference system
Information on the firmware update of the ADN products (“ADN System Update”)
can be found in the “ADN System Software Setup” manual included on the
DVD-ROM (supplied with the central unit) or at www.sennheiser.com.
For further information on firmware updates for your ADN conference system,
contact your Sennheiser partner.
CAUTION
Danger of damage to the conference system!
Improper modification of the firmware (e.g. due to updates) can cause irreparable
damage to the conference system.
왘 Only update the firmware if the function of your conference system is impaired
or if the update is recommended by Sennheiser.
왘 Contact your Sennheiser partner to update the firmware.
왘 While the update is in process, do not disconnect the ADN CU1 central unit, the
ADN PS power supplies and the conference units from the mains power supply.
To Next Page
Loading...
