Using the ADN Cable Calculator software
20 | ADN Digital Conference System
Using the ADN Cable Calculator software
The “ADN Cable Calculator” software allows you to calculate the voltage supply on
the individual sections of a cable string or cable ring and to plan the structure of
the conference system. If no warnings are given after the calculation and you set
up your conference system as calculated with the software, your conference
system will run within the specifications.
System requirements
Installing the ADN Cable Calculator
To install the software, you require administrator rights.
왘 Close all running applications.
왘 Start the “ADNCableCalcSetup.exe” file in the “ADN Cable Calculator” folder on
the enclosed DVD-ROM.
A confirmation prompt appears:
Component Requirement
PC Standard PC with x86-CPU
Operating system Microsoft Windows XP
Microsoft Windows Vista
Microsoft Windows 7
The following steps describe the installation of the “ADN Cable Calculator”
software on a PC running Windows XP. The installation on a PC running
Windows Vista or Windows 7 is performed in a similar way.
To Next Page
Loading...
