Sennheiser ADN C1 - Adjusting the Language - *Language

ADN Digital Conference System | 69
Configuring the conference system via the central unit
왘 In a redundant ring topology, only use conference units with hardware
revision 2.
Displaying the software version –
“Software Version Info”
If the software versions of the conference units (“D1/C1”) and the central unit
(“CU1 SB” and “CU1Main”) used in the conference system are consistent, the
version number is displayed (e.g. “0.1.1.5”).
If the software version of the conference units is varying, “Varying” is displayed.
Always use consistent and up-to-date software revisions in order to be able to use
all functions. Further information on software updates for your ADN conference
system is available from your Sennheiser partner.
Adjusting the language – “*Language”
Via the “*Language” menu item, you can adjust the language of the operating
menu:
Possible settings: Chinese, Danish, German, English, Finnish, French, Dutch, Italian,
Japanese, Norwegian, Russian, Swedish, Spanish
This menu item is marked with an asterisk “*” so that it can be found even if a lan-
guage unknown to you is adjusted.
If there is no redundant ring topology but the conference system warns
nevertheless of inconsistent hardware versions, the IN socket and the
OUT socket on one conference unit have been accidentally swapped.
To eliminate the warning message:
왘 Set up the conference system correctly (see page 32).
IN OUT
쐅
쐈
Select and call up the
“Versions” submenu
Select and call up the
“Software Version Info”
menu item
View the information;
exit the menu item
Versions
Hardware Version Info
Software Version Info
No No
Software Version Info
D1/C1: 0.1.1.5
CU1 SB: 1.0.0.0
CU1 Main: 1.0.0.0
Main Menu
System Menu
Versions
Select and call up the
“*Language” menu item
Select the desired
setting; store the
setting
Main Menu
Audio Menu
System Menu
*Languages
*Language
English
Deutsch
Nederlands
No
English