Appendix
158 | ADN Digital Conference System
ADN PS mounting dimensions
Factory default settings
mm
mm
mm
mmmm
mm
Menu item/description Factory default settings
“Conference Mode” – conference mode “Direct Access”
“Microphone Limit” – max. number of speakers
who can take the floor simultaneously
“4”
“Request Limit” – max. number of requests to
speak
“10”
“Talk Time Status” – status of speaking time limit deactivated (“Off”)
“Talk Time Limit” – length of speaking time limit “60 Min”
“Premonition Time Limit” – advance warning time “10 Sec”
“Reaction on Talk Time Exceed” – behavior when
the individual speaking time is exceeded
microphone is deactivated
immediately (“Cancel”)
“Blink on Request” – flashing of the signal light ring
when a request to speak is made
activated (“On”)
“XLR Out Status” – audio output activated (“On”)
“XLR Out Volume” – audio output volume “+ 6 dB”
“XLR OUT Equalizer” – tone color of audio output 0 dB
“XLR In Status” – audio input activated (“On”)
“XLR In Sensitivity” – input sensitivity of audio
input
“+ 7.5 dBu”
To Next Page
Loading...
