Replacement – Basic Components Servicing the iCon APX Meter
4-6 Servicing the iCon APX Meter TM-iX0A-0805
Installing the Meter Cover
1. Reseat the Meter Cover into the Meter Base Assembly
2. Turn the Meter Cover clockwise until it reaches a positive stop.
Figure 4-2: Installing the Meter Cover
3. Install a new T-Bar Seal.
4. Install a new Demand Reset Seal.
Replacement of the Register Cover
The instructions in this section provide the necessary steps required to replace the Register
Cover.
To Next Page
Loading...
Need help?
General
