Alarms, Diagnostics, and Errors Codes
Version 1.0 Alarms, Diagnostics, and Errors C-3
Alarm Codes - continued
Codes Description Notes/Corrective Action
0112 Low Current Phase A
0113 Low Current Phase B
0114 Low Current Phase C
0115 Low Current (System)
The user configures the meter to monitor these thresholds.
Corrective actions are determined by the utility’s standard
procedures.
0116 High Current Phase A
0117 High Current Phase B
0118 High Current Phase C
0119 High Current (System)
The user configures the meter to monitor these thresholds.
Corrective actions are determined by the utility’s standard
procedures.
0120 Low Voltage Phase A
0121 Low Voltage Phase B
0122 Low Voltage Phase C
0123 Low Voltage (System)
The user configures the meter to monitor these thresholds.
Corrective actions are determined by the utility’s standard
procedures.
0124 High Current Phase A
0125 High Voltage Phase B
0126 High Voltage Phase C
0127 High Voltage (System)
The user configures the meter to monitor these thresholds.
Corrective actions are determined by the utility’s standard
procedures.
0128 Low Leading PF Phase A
0129 Low Leading PF Phase B
0130 Low Leading PF Phase C
0131 Low Leading PF (System)
The user configures the meter to monitor these thresholds.
Corrective actions are determined by the utility’s standard
procedures.
0132 High Leading PF Phase A
0133 High Leading PF Phase B
0134 High Leading PF Phase C
0135 High Leading PF (System)
The user configures the meter to monitor these thresholds.
Corrective actions are determined by the utility’s standard
procedures.
0136 Voltage Sag Phase A
0137 Voltage Sag Phase B
0138 Voltage Sag Phase C
0139 Voltage Sag (System)
The user configures the meter to monitor these thresholds.
Corrective actions are determined by the utility’s standard
procedures.
0140 Voltage Swell Phase A
0141 Voltage Swell Phase B
0142 Voltage Swell Phase C
0143 Voltage Swell (System)
The user configures the meter to monitor these thresholds.
Corrective actions are determined by the utility’s standard
procedures.
0144 AMR Module Error
The AMR module has reported an error to the meter.
Refer to the documentation that accompanied the module.
0145 AMR Communication Error
The AMR module is no longer communicating with the meter.
Reseat the module. If the condition persists, contact technical
support.
To Next Page
Loading...
Need help?
General
