Sensus iCon APX - Page 72

Index
M
Meter Specifications
Environmental Contitions, B-1
Maximums, B-1
Input Specifications, B-2
Meter Base Assembly, 2-3, 3-2
Maximums, B-1
Meter Communication, 4-1
Operating Conditions, B-1
Meter Configuration, 3-8
Physical Dimensions, B-2
Meter Cover, 2-14
Metering Chip, 3-4, 5-3
Installing, 4-6
Metering Constants, 3-9
Removing, 4-5
Metrology, 5-1
Meter Hardware, 2-3
Modes
ADE7758 Integrated IC Chip, 2-6
Diagnostic, 2-17, 2-18
Buss Bars, 2-6
Display, 3-6
Connector Ports, 2-6, 2-14
Normal, 2-16
Infrared LED, 2-10
Test, 2-11, 2-13, 3-5
Infrared LED Sensor, 2-10
N
Interconnect Board, 2-14
Knockouts, 2-5
Nameplate, 2-8
LCD, 2-11
Normal Display List, 2-16, 3-7
LCD Annunciators, 2-11
O
LCD Displays, 2-11
LCD Indicators, 2-11
Opening Phantom Load Links, 3-2
Meter Base, 2-3
Operating Conditions, B-1
Meter Base Assembly, 2-3, 3-2
Optical Pick-Up, 3-3
Form 15S/16S, 2-5
Optical Port, 2-10
Form 16S (14S, 15S, 17S), 2-4
Option Board Knockouts. See Knockouts
Form 9S (8S), 2-4
Option Boards, 2-14
Knockouts, 2-5
Outage Recognition, 5-6
Sensor Board, 2-6
Outage Recognition Time, 2-15
Meter Cover, 2-14
P
Metering Chip, 3-4, 5-3
Optical Port, 2-10
Passwords, 2-18
Option Boards, 2-14
Peak Demand, 5-5
Phantom Load, 2-5
Performing a Cold Start, 4-2
Register Cover, 2-8
Permissions, 2-18
Register Cover Assembly, 2-7
Phantom Load, 2-5
Register Display Board, 2-10, 2-14
Phantom Load Links, 3-2, 3-3
Sensing Circuitry, 2-6
Closing, 3-3
Sensor Board, 2-6
Opening, 3-2
Switching Power Supply, 2-6
Phase Angle Displacement Check, 3-10
Meter Multiplier, 3-9
Phase Angles, 3-7
Meter Power-Up, 3-7
Phase Rotation, 3-7
Meter Reset, 4-1
Phase Voltage Deviation Check, 3-10
Polarity and Cross Phase Check, 3-10
Power Supply, 5-4
Previous Demand Registers, 1-3
Primary Metering, 5-6
PT Ratio, 3-9
Version 1.0 I-3