Servomex 2500 Series User Manual

1.1
SECTION 1 INTRODUCTION
1.1 Introduction
This manual contains information regarding installation and hardware configuration of
the Servomex 2500 Series analysers (2500GEN/EU1/EU2/FM2, 2510GEN/EU1/EU2/
FM2/HTV, 2520GEN/EU2/FM2, 2550GEN/EU1/EU2/FM2 variants).
GEN – General Purpose/Safe area use.
HTV – High Temperature Variant.
EU2 – Certified for UK/European Zone 2 areas.
EU1 – Certified for UK/European Zone 1 areas.
FM2 – Certified for US Class 1 Div.2 areas.
Note that the EU1, EU2 and FM2 versions can also be used where flammable samples
are to be monitored in otherwise safe areas.
The Servomex 2500 Series has been designed and manufactured using Servomex
quality systems, which have been certified to ISO9001.
A separate Quickstart manual is also supplied with the 2500, 2520 and 2550 analysers,
reference part number 02500/003C. This details software configuration and operation
of the analyser. An alternative Quickstart manual is supplied with the 2510 analysers,
reference part number 02510/003C. Extra copies of either may be ordered from
Servomex.
Some variants are supplied with a Safety Certificate Manual, reference part number
02500/008C that details the hazardous area approvals and declarations applicable.
Details of the hardware and instructions for servicing, by qualified personnel only, are
presented in the 2500 Service Manual. This may be ordered from Servomex, reference
part number 02500/002C.
Technical assistance and spare parts are available from Servomex outlets (or their
local agents) listed on the back cover.
Use this manual for:
Use the Quickstart manual for:
Installation
To take commissioning to the point where the analyser is
powered and operational. The installer is advised to read
this manual completely before commencing installation.
Configuration
How to set up the clock, passwords, alarm levels, analogue
outputs, relays and other parameters.
Calibration
How to use the manual and automatic calibration/checking
facilities.
Review
How to review configuration and set-up information.

Servomex 2500 Series Specifications

General

Brand	Servomex
Model	2500 Series
Category	Measuring Instruments
Language	English