Sevcon MillipaK User Manual

Configuration Performance/Creep Speed
______________________________________________________________________________
MillipaK PUMP Controller Manual Page 22 07/11/05
Creep Speed
The Creep speed is adjustable and is used to select a minimum pulsing level as soon as any pump
function is requested, to minimise delays and dead-bands. The motor voltage is rapidly ramped to
the creep level (equivalent to a 100mS ramp time).
Immediate Creep Speed
Calibrator Menu Reference:
8.01
Minimum Maximum Step Size Typical Value
0% 25% 1% 0%

Sevcon MillipaK Specifications

General

Brand	Sevcon
Model	MillipaK
Category	Controller
Language	English