Sevcon MillipaK User Manual

Installation Wiring/Power
_____________________________________________________________________________________
MillipaK PUMP Controller Manual Page 8 07/11/05
MillipaK Pump Power Wiring
NOTE: The Pump battery positive power terminal may be wired directly to the battery positive
(via a suitable fuse) or via a line contactor if used in a Traction / Pump system.
It should be considered whether or not pump operation is required if a traction fault causes the
line contactor to drop out.

Sevcon MillipaK Specifications

General

Brand	Sevcon
Model	MillipaK
Category	Controller
Language	English