Introduction
_____________________________________________________________________________________
MillipaK PUMP Controller Manual Page 5 07/11/05
Introduction
The MillipaK PUMP (series motor) range of controllers provides a new range of power frames for
24V-48V, 180A - 600A in one of two small, highly efficient packages. This is achieved using a
Sevcon patented power switching scheme and radical new construction techniques, which enable
large powers to be incorporated into very small packages.
The MillipaK provides a completely sealed (IP66) unit containing both power and logic circuitry,
as well as all suppression components.
MillipaK supports Sevcon’s existing MOS90 calibrator for adjustment of pump characteristics.
Controllers are FLASH microprocessor based enabling field re-programming for new features and
have numerous user set-up options. The MillipaK uses high frequency (silent) MOSFET power
switching technology, to control a Series power frame comprising Armature circuit only.
Armature currents are monitored. Controllers have been designed to satisfy the requirements of
the relevant UL and EC standards.
To Next Page
Loading...
Need help?
General
