SEW-Eurodrive MOVIMOT flexible MMF1 C/DBC Series - Page 194

8
Service
Fault messages with parameterizable response
Operating Instructions – MOVIMOT
®
flexible
194
Fault Description Index
no.
Possible fault response
Encoder – warning Here you can set the device re-
sponse to an encoder warning.
8622.13
• Warning
• Application stop (with out-
put stage inhibit)
• Emergency stop (with out-
put stage inhibit)
• Inhibit output stage
Encoder – fault Here you can set the device re-
sponse to an encoder fault.
8622.14
• Application stop (with out-
put stage inhibit)
• Emergency stop (with out-
put stage inhibit)
• Inhibit output stage
Application heartbeat
timeout
(only with DSI designs)
Here you can set the device re-
sponse to a timeout of the applica-
tion heartbeat.
8622.21
• Warning
• Application stop (with out-
put stage inhibit)
• Emergency stop (with out-
put stage inhibit)
• Inhibit output stage
29129451/EN – 12/2019