6
Startup
Disabling DynaStop® for startup purposes
Operating Instructions – MOVIMOT
®
flexible
164
6.12 Disabling DynaStop
®
for startup purposes
Disabling
DynaStop®
for startup
purposes
6.12.1 Important notes on disabling DynaStop
®
(/DSP option)
WARNING
Removing the electronics cover will disable DynaStop
®
.
Severe or fatal injuries.
• If it is not permitted to deactivate the system, additional measures are required
(e.g. mechanical stake-out)
WARNING
Electric shock due to regenerative energy created by moving system or machine.
The regenerative energy can cause dangerous voltages at the terminals or plug con-
nectors, even when the supply voltage is disconnected.
Severe or fatal injuries.
• Never touch the wiring space with wiring board and plug connector.
• If you cannot rule out that the wiring space is touched, provide for suitable pro-
tection covers.
NOTICE
Damage to the connector plug between drive unit and electronics cover due to re-
generative energy created by movement of the system or machine.
Potential damage to property.
• To disable DynaStop
®
, you have to remove the electronics cover completely to
prevent damage to the plug connector (destroyed contacts).
29129451/EN – 12/2019
To Next Page
Loading...
