SEW-Eurodrive MOVIMOT flexible MMF1 C/DBC Series - DynaStop in conjunction with STO

7
Operation
DynaStop® in conjunction with STO
Operating Instructions – MOVIMOT
®
flexible
184
7.7 DynaStop
®
in conjunction with STO
DynaStop®
in
conjunction
with STO
WARNING
The DynaStop
®
electrodynamic retarding function does not allow for a definite stop
at a position.
This can result in severe or fatal injuries.
• DynaStop
®
must not be used for hoists.
• When DynaStop
®
is used on inclining/downward slopes or for vertical conveyors
without free hanging loads, adhere to the basic safety and health requirements
(e.g. the EG Machinery Directive 2006/42/EG).
• The behavior of the DynaStop
®
function must be taken into account for the risk
assessment of the application, that determines the required safety measures.
INFORMATION
Observe chapter "Functional safety" for using the STO function.
The optional DynaStop
®
function is not safety-related. It is not part of the safety func-
tions described in chapter "Functional safety".
29129451/EN – 12/2019